Fence panel and gate

So this past weekend I installed a new fence panel (from home depot) and made a new gate from scratch. I used a cedar panel fence, to add to the existing fence on the North side of our home. By doing this, I was able to add a gate, so we could enclose our backyard.

I made a similar gate this past fall for the South side of the house, and that turned out well; so I decided to make a similar style one on the North side of the home. This one would be quite a bit wider however, about 45″ wide to be exact.

I used the Homax no-sag gate kit, along with cedar fence panels,
a Boerboel gate handle, and a National Hardware gate latch.

I also installed a 4″x6″ x 8 feet fence post, of which I used Quikrete cement to mount the post. I dug the whole with a recent $125 Auger purchase.

Anyhow, here are some photos and a video of my auger 😉